Instruction Manual for DSM-26LAN / DSM-48LAN
1.2.Rear Panel
1.2.1.Power Connector
The DSM-26/-48LAN has an internal power supply that will accept voltages ranging from 200V - 240V and
frequencies from 50Hz-60Hz. An IEC cord is included.
1.2.2.Power Switch
The Power Switch turns the DSM-26/-48LAN on and off. Note: we recommend that power amplifiers
connected to the product, should be powered down prior to cycling the power of this product.
1.2.3.Ethernet Connector
This RJ-45 connector is used to connect your product to a network. It can then be configured and controlled
in
real time with the freely available PC and MAC configuration program. With this program you can also
update
your DSP to the latest firmware. Please check our website regularly for updates.
1.2.4.Analog inputs
The analog input section of the DSM-26/-48LAN offers 2/4 electronically balanced XLR connectors.
The input level is +23dBu max (11V eff.).
1.2.5.Analog Outputs
The output section of the DSM-26/-48LAN offers 6/8
unbalanced, impedance-matched
XLR connectors.
The output level
is +12dBu max (4V eff.).
1.2.6.AES/EBU Inputs
The digital input of the DSM-26/-48LAN offers two input channels (stereo) on an balanced XLR connector. The
processor will accept AES/EBU signals (balanced) and S/PDIF signals (unbalanced) of 16 to 24 bit
resolution
and 44.1, 48, 88.2, or 96kHz sample frequency.
Page 5/12
Summary of Contents for DSM-26LAN
Page 18: ......
