Instruction Manual for DSM-26LAN / DSM-48LAN
1.Overview of Connectors and Controls
In addition to the available features described in this manual, you also have the option of controlling the DSM
with a PC or MAC from a remote location over your network or via a USB cable. Please refer to the
Software Manual for details.
1.1.Front Panel
1.1.1.USB Connector
The USB connector is used to connect the DSM-26/-48LAN to a PC or MAC. It can then be configured
and controlled in real time with the freely available PC and MAC configuration program. With this program you
can also update your DSP to the latest firmware. Please check our website regularly for updates.
1.1.2.Input VU Meters
There are four independent input meters available. The LEDs indicate: Signal (-48dBu), -6dBu, Limit and
Clip. The indication refers to the absolute input level, multiplied with the input gain. The Limit LED lights when
any gain reduction is taking place in that channel. The CLIP LED lights when the input level r22dBu.
1.1.3.Function Buttons
The function buttons allow direct access to all editing and navigating functions. See section three for a
detailed description on the functions of each of these buttons.
1.1.4.Rotary Encoder
The rotary encoder is used to scroll through the menu items by pushing it, and to adjust values by rotating it.
When values are changed, the DSP is updated in real-time.
1.1.5.Output VU Meters
There are six independent output VU meters available. The LEDs indicate: Signal (-48dBu), -6dBu, Limit and
Clip. The indication refers to the output level w.r.t. the threshold of the output peak limiter. The Limit LED
lights when any gain reduction is taking place in that channel. The CLIP LED lights when more than 12dB of
gain reduction is taking place.
1.1.6.Output Mute Buttons
The six output mute buttons are used for independently muting each output.
Page 4/12
Summary of Contents for DSM-26LAN
Page 18: ......
