manualshive.com logo in svg

Monaco LaPalma, Owner'S Manual, Page: 171 / 366

Share
Download
Monaco LaPalma Owner'S Manual Download Page 171

4 • 171

Appliances

2004 • LaPalma

The cooktop range/oven is operated and maintained the same as the

cooktop only with an oven. This option allows for a wider variety in floor
plans and provides more storage space.

• The oven may be used with the cooktop cover down.
• Push in the oven control knob and rotate counterclockwise to

PILOT ON. 

• Light the oven pilot located near the back of the oven, under the

broiler shelf and to the left of the oven burner. 

• Set the oven control knob to PILOT ON to maintain pilot flame.

The oven and broiler are now ready for operation. The oven pilot
has been factory set and requires no further adjustment. 

• To extinguish the oven pilot push in the oven control knob and

rotate clockwise to OFF. 

WARNING: Extinguish all pilots when refueling or

traveling. Do not block vents in oven with cookware or

other objects.

COOKTOP WITH

OVEN (OPTIONAL)

030828

Summary of Contents for LaPalma















































































































































































































































































































































































Reviews:

No comments