Document No: DELTA SIGMA-USM
Version 4
Revision 3.94.2
Page: 6 / 32
On receipt of your DS the batteries should be charged, plug in the included charger, turn unit
on and leave charging for 12hrs. After 5 minutes of inactivity the display will shut off but the
charger will stay on, it will shut down when fully charged. The blinking red LED designates
charging mode.
Above is the DS start up screen. The time can easily be set by pressing the active Time &
Date button. Here you can easily adjust the time and date if you are in another time zone
The instrument is now ready to use.
In order to start measuring, connect the transducer and the temperature probe into the correct
port and press the
MEASURE
button. (See Operations Section)
To shut off the instrument, press the
POWER OFF
button, and then press
YES
in order to power
down the instrument. All data is automatically stored, so there is no risk of loosing data by
powering down the instrument.
START UP SCREEN
POWER ON
TIME & DATE
START
BOLT LOAD
MEASUREMENT
POWER OFF
SETUP AND
OPTIONS
INCLUDING
MEMORY FORMAT
BATTERY LEVEL
INDICATOR