Page: 9 / 32
Document No: DELTA SIGMA-USM
Version 4
Revision 3.94.2
NEW PROJECT SCREEN
Enter Project Name and confirm by pressing
ENTER.
You then get a question if you really want to create a new
project or not. If you do, press
YES
. If you do not, press
NO
and
you will return.
Enter Operators name and confirm by pressing
ENTER.
Choose Units and press
NEXT.
Enter comments, if any. Once you press
SAVE
button the
project is saved.
If you want a short report: Press short
If you want a long report: Press long
All data is stored in the DS so this is changeable. This can be
changed at a later stage.
If Expert mode is enabled, the “Master Bolt Option” that can
be used to speed up the initial length reading process.
By setting this to YES, if the first bolt you enter is “Bolt
000”, the unit will use this as the “Master Bolt”.
The unit will use the receiver settings for the master bolt for
all following bolts. NB: This is only to be used if the bolt
group is homogenous.