Momax RO1S, Instruction Manual

Page: 14 / 45

Prompt Tone Possible cause and solution
“Oh dear! I cannot find the
dust collector.”
The dustbin is taken out that
interrupts the cleaning. Make
sure the dustbin is properly
installed.
“Please place me in a new
location and try again.”
Pick the robot up and re-start.
“Please scrub the cliff
sensor/front sensor/
right-hand sensor/bumper,
and restart me from a new
location.”
Sensor faults. Clean the sensor(s)
and check if it is covered by
foreign object.
“Master, please clean the
dust container and filter.”
The dustbin is full. Empty dustbin
and clean dust passage.
“Dust container has to be
removed, please clean the
container and filter.”
A reminder when the dustbin is
removed.
“I’m stuck, please help me!”
Pick up the robot and check if
there is any obstacle. Remove
debris if necessary.
“Please place me correctly.” The robot is tilt.
“Please check if my wheels
have become blocked
somewhere.”
Check both driving wheels and
see if they are stuck or twined.
Prompt Tone Possible cause and solution
“Please check if the main
brush/side brushes have
become stuck.”
Check each brush and remove
foreign object or debris.
“What’s going on? Where is
the docking station?”
Make sure the recharging dock
is connected to the power socket
with the power indicator light ON.
The robot is out of range. Put the
robot near the recharging dock
and check if it is able to return to
the dock.
“On dear! Program error,
please restart me.”
Restart the robot.
“Error encountered initiating
shutdown.”
There is an error occurs and the
robot shuts down automatically.
For examples,
1. Running out of battery
2. The robot is not on the
recharging dock.
3. The robot is not aligned to the
contacts of the recharging dock.
“Low battery, please
recharge.”
The robot is not on the recharging
dock while the battery level is
lower than 10%.
“To shut me down, please
place me away from the
docking station.”
If you want to power OFF the robot,
you have to place the robot away
from the recharging dock.
24 25