Momax RO1S, Instruction Manual

Page: 11 / 45

Ensure the machine is unplugged before maintenance.
Maintenance
1. Cleaning Rolling Brush
A. Press the buckle on the rolling brush cover to take the rolling brush.
B. Check rolling brush to see whether there is any dust stuck on the
brush.
C. Clean the rolling brush using a tiny brush or by tool or cloth.
D. Reassemble the rolling brush to the host.
2. Cleaning Side Brushes
A. Check sides brushes to see whether they are damaged or any dust
stuck on the brushes.
B. Clean the side brushes by tool or cloth.
C. Replace the side brushes if they are damaged. (Carefully pull brush
to remove).
3. Cleaning Dust Bin & Filter
A. Empty the dust bin after use.
B. Press the finger notch button and pull out the dustbin.
C. Take out HEPA filter and sponge filter.
D. Empty the dust bin.
E. Wash dust bin and filters under tap water.
F. Install HEPA and sponge filter into the dust bin after it is dry, and then
install it into the host.
Note:
• After taking out the dust bin, check whether there are dust stuck in dust
passage and clean it.
• Rinse HEPA filter after 15-30 days use. It is recommended to replace the
HEPA filter after 6-8 months.
• After rinsing HEPA and sponge filter, dry them in a ventilated area and
install them after they are fully dry.
R L
R L
L R
18 19