background image

Molten Voltage™

CV-SYNC™

Owner’s Manual - p.7

[email protected]

© 2014 - MoltenVoltage.com - All Rights Reserved.

v 1.0

Support

[email protected]

Related Products

MASTER CONTROL (MV-58 and MV-58B)

TEMPODE, the MIDI Clock Injector

MIDI Splitty - MIDI Pedalboard Repeater

Many more available soon!

Warranty

Molten Voltage is proud of its products and warrants
this unit for a period of two (2) years from the date
of purchase to be free from defects in materials and
workmanship under normal use and service, as long
as the unit is used with an approved power supply,
and consistent with these instructions.

Contact 

[email protected]

 regarding

repairs.  Any user repair attempts void the warranty.
PROOF OF PURCHASE IS REQUIRED FOR WARRANTY
REPAIRS.

Molten Voltage MIDI PedalBoard Devices

Sturdy
Scalable
Simple

streamline your sound

DISCLAIMER

Information contained in this publication regarding device applications and the like is provided only for
your convenience and may be superseded by updates. It is your responsibility to ensure that your
application meets with your specifications. 

MOLTEN VOLTAGE MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY
OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS
CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE.

 Molten

Voltage disclaims all liability arising from this information and its use. No licenses are conveyed, implicitly
or otherwise, under any Molten Voltage intellectual property rights.

SIMI, CV-Sync, MASTER CONTROL, MIDI Splitty, TEMPODE, NODE, Tru-Foot, Molten Voltage, Visionary
Effects, ReMute, “Sturdy Scalable Simple”, “streamline your sound”, “Design simple Design sublime”, and
“the future just showed up” are all trademarks of Molten Voltage.  

[email protected]

Summary of Contents for CV-Sync








Reviews: