Molten Voltage™
CV-SYNC™
Owner’s Manual - p.2
© 2014 - MoltenVoltage.com - All Rights Reserved.
v 1.0
CONNECTING
Plug in a
separate or isolated
9 volt, 2.1mm, 100mA minimum,
tip negative
DC Power supply into
the DC9V jack (B).
Never power CV-SYNC using a "daisy chained" power supply that is also
connected to audio effects.
(A) MIDI IN Jack
(B) DC Power Jack
(C) PGM Switch
(D) STATUS LED
(E) RATIO 2 Control
(F) RATIO 1 Control
(G) CV 2 Output
(H) CV 1 Output
MIDI Input
Connect a standard 5-pin MIDI cable to the MIDI IN Jack (A).
MIDI Clock
CV-SYNC pulses the CV 1 and 2 Outputs relative to the incoming MIDI Clock.
Maximum MIDI Clock interval = 2.5 seconds (24 bpm)
Minimum MIDI Clock interval = 0.25 seconds (240 bpm)
Output only occurs while MIDI Clock data is being received.
MIDI Start (FA) commands instantly reset both outputs.
