Molpir M-374, Installation Manual

Page: 27 / 40

M-374 is car alarm controlled via 2-way remote control with 5 buttons and display. By this remote control
it is possible to control alarm functions and to get feedback information on alarm and vehicle status in the
range up to 500 m (depending on local conditions). User gets reliable alarm with pager with exact
identification of intrusion into the vehicle in one unit. Standard 4 buttons remote control without display is
used as a back-up remote control.
Car alarm M-374 is dedicated for vehicles with 12V board voltage and minus pole connected to the
chassis.
Alarm has these additional features:
•
inputs for 2 independent sensors (separated zones)
•
integrated blocking relay with output for optional blocking
•
signal interface for central locking control
•
automatic programmable Comfort output (for example automatic windows close after arming)
•
2 control outputs for accessories (-300 mA) controlled via remote control
Display shows recorded alarms until switching ignition ON (for analysis of possible problems).
For emergency disarming can be used 2 digits personal PIN code.
Content of the set (full set M-374):
Ordering codes of M-374 set parts:
Item Item description Ordering code
1 Alarm M-374 full set M-374
2 Control unit of car alarm M-374 617112-M
3 2-way remote control with display for M-374 alarm 617123-M
4 Remote control for M-374 alarm 617124-M
5 Battery for remote control without display (2 pcs) - CR2025 CR2025
6 Battery for remote control with display - Alkaline AAA B-LR03
7 Antenna transmitter/receiver for remote controls of M-374 ANT006
8 Wire harness 600374-M
9 Immobiliser wire harness (2 pcs) 480070
10 Indication LED 617103-M
11 Shock sensor 617311-M
12 Hood trigger 617524-M
13 Valet switch 617126-M
14 Siren 12V 617206-M
15 User manual N-M-374-User_001
16 Installations manual N-M-374-Mont_001
E
n
g
li
sh