Page 3 of 22
Rev B
–
Dec 2009
No person should be permitted to operate
the MOLNAR SCISSOR LIFT HOIST
without first studying the operating
instructions on top of page 9 and safety
precautions on page 11.
This manual should be kept in a safe
place and referred to as necessary
The installation requirements on page 19
must be completed and the certificate on
the inside back cover must be signed by
the installer. The guarantee card must be
completed and returned to MOLNAR
ENGINEERING PTY. LTD.
When installed in tropical environments it
is advisable to raise the hoist to full height
when not in use overnight or on
weekends, to minimise condensation
forming inside the cylinder which may lead
to corrosion of cylinder bore or shaft.
This vehicle hoist is not designed to be
used for steam cleaning nor be installed in
the open exposed to the elements.
Vehicle hoists installed under such
conditions are not covered by our
guarantee.
Summary of Contents for SL02
