Page 6 of 24
TM04301 Molift Quick Raiser 2+ 09 English - Rev B 01/2011
Service
Service
The lifter has a service lamp on chassis which will
give a signal when service of the lifter is required.
The service lamp gives a green light when the lifter
can be used normally.
The electronics measures the operating time of the
lifter, and after a specific time the service lamp will
give a signal, first yellow light then red - indicating
that the lifter needs service. Take contact with your
local Molift service representative/dealer. The lifter
can still be operated, but after a while an audible
alarm will sound, to remind the operator that the
lifter needs service immediately.
Service light codes
Service light
Mode
No light
Power saving
Green
Ready for use
Yellow
Book service
Red
Perform service
Red + sound
Perform service
immediately
Flashing yellow
Overheating
Service includes control and change of worn or
damaged parts.
The service partner uses the Molift Service Tool
to read the data from the lifter, and for logging
service and resetting the service LED. The owner is
responsible to ensure proper logging and written
verification performed by authorised service
partner.
Troubleshooting
See the Operator Manual.
If the troubleshooting table in the User Manual
does not resolve the problem, judgement and a
process of elimination will have to be used.
It will be up to the repair engineer to make such
assessments, so there is no need to describe any
further fault-finding procedures.
Service lamp
