Distributor of Molex Connector Corporation: Excellent Integrated System Limited
Datasheet of 0640054100 - AT-FIFG CRIMP TOOL HEAD
Contact us: [email protected] Website: www.integrated-circuit.com
AT-FIFG Air Head Crimp Tool
Doc No. 64005-4100 Release Date: 09-22-03
UNCONTROLLED COPY
Page 3 of 6
Revision: A
Revision Date: 09-22-03
“
X ”
NOT POSSIBLE TO PIN GAUGE,
MEASURE A
*SOLDER, LEAD
OR
Tool Calibration
A Certificate of Calibration (see last page) was supplied with the tool. To recalibrate this tool,
measurements should be taken from each conductor nest and compared to this chart. The tool should be
lubricated prior to recalibration to ensure consistent measurements.
Wire Range
“X” Dimension Conductor Crimp
Nest Color Code
AWG mm²
Mean
Go
No Go
Crimp Inspection Marking
Blue
14 - 16
2.00 – 1.30
.078
.076
.088
---
Red
18 - 22
0.80 – 0.35
.068
.066
.070
---
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials.
All vital components are long life tested. All tools are warranted to be free of manufacturing defects for a
period of 30 days. Should such a defect occur, we would repair or exchange the tool free of charge. This
repair or exchange will not be applicable to altered, misused or damaged tools.
4 / 7
4 / 7
