AT-2214 Head Crimp Tool
Doc No: ATS-640053400
Release Date: 06-23-03
UNCONTROLLED COPY
Page 4 of 7
Revision: B
Revision Date: 09-30-05
Tool Calibration
A Certificate of Calibration (See last page) was supplied with the
tool. To recalibrate this tool, pin gauge measurements should
be taken in each conductor nest and compared to this chart.
The tool should be lubricated prior to recalibration to ensure
consistent measurements.
Wire Range
“X” Dimension Conductor Crimp
Awg
mm²
Mean
Go
No Go
14 - 22 0.35 - 2.00
.100
.096
.104
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All
vital components are long life tested. All tools are warranted to be free of manufacturing defects for a period of
30 days.
Should such a defect occur, we would repair or exchange the tool free of charge. This repair or
exchange will not be applicable to alter, misused or damaged tools.
CAUTION
: Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
PIN GAUGE IN
CONDUCTOR CRIMP
“ Confining ” Crimp
X
