AT-2214 Head Crimp Tool
Doc No: ATS-640053400
Release Date: 06-23-03
UNCONTROLLED COPY
Page 1 of 7
Revision: B
Revision Date: 09-30-05
Air Powered
Crimp
Tool Head
Application Tooling
Specification Sheet
Order No. 64005-3400
Engineering No. AT 2214
FEATURES
Quick-change tool head for the 19279-0001 (AT-200)
A precision user-friendly terminal locator stop holds terminals in the proper crimping position
SCOPE
Products: Nylon closed end connectors 14 - 22 AWG. This tool head is intended for use in the 19279-0001 (AT-
200) either hand held or with optional bench adapter 19078-0307 (ATBA) and foot switch.
Testing
Mechanical
The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections. The
following charts show the UL specifications for various wire sizes. The tensile strength is shown in pounds and
indicates the minimum acceptable force to break or separate terminal from the conductor. On this style product,
only the reading from the smallest wire AWG is used. See Chart 1.
Wire Size (AWG) *UL – 486 C
22
8
20
10
18
10
16
15
14
25
* UL – 486 C – Closed end connectors and Wire Nuts.
The following is a partial list of the product part numbers and their specifications that this tool is designed to run.
We will be adding to this list and an up to date copy is available on www.molex.com.
Terminal No. Terminal Eng No. (REF)
Wire Size
Wire Combinations
AWG
mm²
19160-0012
NC-2214
14 - 22 (2.00-0.35)
See Chart 1
19160-0013
NC-2214-BA
14 - 22 (2.00-0.35)
See Chart 1
19160-0015
NC-2214-L
14 - 22 (2.00-0.35)
See Chart 1
19160-0016
NC-2214-Y
14 - 22 (2.00-0.35)
See Chart 1
OPERATION
Refer to the instruction manual for the 19279-0001 (AT200) for
mounting this crimp tool head.
3/8 “
