molex 19279-0001, Operating And Maintenance Instructions Manual, Page: 8 / 18

AT-200 Air-Powered Crimp Tool
Doc No: TM-192790001 Release Date: 07-01-02
UNCONTROLLED COPY
Page 8 of 18
Revision: D Revision Date:11-10-09
CRIMPIMG HEAD
JAW ASSY
TRIGGER SAFETY
(LOCKED)
#1/4 – 20 SLOTTED
SCREWS (2)
PULL OUT
Figure 4
TURN
CLOCKWISE
(CW)
TRIGGER SAFETY
(LOCKED)
CAM
INCORRECT CAM
ALIGNMENT
#1/4-20 HOLE
CORRECT CAM
ALIGNMENT
Figure 5
TRIGGER SAFETY
(LOCKED)
CAM
#1/4-20 HOLE
2.1 Changing Crimp Tool Heads
1.
Engage the trigger safety or disconnect the air supply.
2. Remove the (2) #1 /4-20 slotted screws on both sides of the power unit. Pull the crimp tool head jaw assembly
out of the tool. See Figure 4.
3.
Before attempting to replace the dies, make sure the wedge points of the cam line up with the (2) #1/4-20 holes
in the front of power unit. See Figure 5.