LW004-CT
12 www.mokosmart.com
⚫
Battery Level: 100% (
0x64
)
⚫
MAC Address: D3 64 40 05 4A 1C (
0xD3 64 40 05 4A 1C
)
⚫
Device ADV Name
：
LW004-CT (
0x4C 57 30 30 34 2D 43 54
)
3.2.2 Bluetooth Scan
When scan switch status is on, the device will start to scan beacons nearby and cache the beacon
information that meets the conditions.
Users can set the scanning intensity according to different application scenarios, a total of three
levels of high, medium and low can be set.
Note:
The intensity of the Bluetooth scan affects the broadcast performance of the device. If the
broadcast performance of the device is found to be affected, it is recommended to reduce the ADV
Interval of the device, but this will increase the power consumption of the device.
The Bluetooth scanning function of LW004-CT has two main parts:
Contact Tracking Scanning
and
Location Beacon Scanning
. They will not affect each other.
3.2.2.1 Contact Tracking Scanning
Contact Tracking Scanning
is mainly used to scan the LW004-CT worn by others. By scanning the
device data of LW004-CT, the information of people in close contact with the user can be recorded.
The following is the specific description of
Contact Tracking Scanning
rules:
①
There are two sets of filter conditions, one is Filter Condition A, and other one is Filter
Condition B. Each filter condition has a separate switch setting, which can be arbitrarily switched
on or off.
②
When both of Filter Condition A and Filter Condition B are switched on, the relationship
between two sets of filter conditions can be set as AND or OR.
AND: Beacon information is stored and reported only when the data meets both Filter Condition A
and Filter Condition B.
OR: Beacon information is stored and reported when the beacon data meets either filter condition
A or filter condition B.
If only one condition is opening, the data that meets this filter condition will be saved and
uploaded.
Note:
When both Condition A and Condition B are off, the Contact Tracking Scanning function can
continue to work without filtering conditions.
③
There are seven filter items in each set of filter conditions, which are RSSI Filter, MAC Address
