INFORMATION FOR USERS
For the purpose and effect of Directives 2002/95/CE, 2002/96/CE and 2003/108/CE, relative to the reduction of the use
of hazardous substances in electrical and electronic appliances as well as the disposal of waste.
The barred waste bin symbol indicates that the product must be collected separately from other waste at the end of its
life.
The user must therefore take the appliance to an approved collection point suitable for differential collection of electric
and electronic waste.
1. SAFETY WARNINGS
This dehumidifier must always be connected using earthed electrical plugs as required for all electrical appliances; FRAL
Company declines any responsibility for any danger or damage whenever this norm is not complied with.
Any intervention on the machine using any instrument must be carried out only by a qualified technician.
When the machine is connected to the power socket, it must be in a vertical position and moving should be avoided.
Moving whilst connected to power could cause water to come into contact with electrical parts. It is therefore
recommended to remove the plug from the socket before moving the dehumidifier.
Correct Distance: this dehumidifier draws in the air from the back and lets out through the front side grill: therefore the
back panel, which supports the air filter, must be kept at a minimum distance of 15cm from the wall.
This dehumidifier has been designed and manufactured in compliance with the strictest safety rules. Therefore, pointed
instruments (screw drivers, wool needles or similar) are not to be inserted into the grill or in the opening of the back panel
when it is opened to remove the filter.
The machine must not be cleaned using water. To clean the machine, use a wet cloth. Remember to disconnect the plug
from the socket beforehand.
The front panel should not be covered at anytime.
The filter should be cleaned periodically (normally every month). In dusty rooms it should be cleaned more often.
Remember that when the filter is dirty, the air circulation and consequently, the machines performance is reduced.
Moisture Cure Pty Ltd (02) 6584 2511 www.moisturecurecommercial.com.au [email protected]
