Mohlenhoff WLK 180, Manual

Page: 24 / 100

24
ENG
DEU
RUS
ITA
DAN
Product information
System convectors for installation in the floor area (screed level) can be used, de-
pending on the selected inlet temperature, for cold air protection in front of win-
dow façades or as complete heating systems.
Examples for areas of application:
9
Private living areas
9
Winter gardens
9
Restaurants
9
Foyers, reception halls
9
Shop rooms
9
Exposition rooms
9
Office and administration buildings
The use is inadmissible in:
;
Areas with air with high dust content or aggressive air
Areas of application
Intended use
The Möhlenhoff warm water system convector (WLK) and the warm water system
convector Power (WLKP) are exclusively intended
9
for heating in closed rooms for covering remaining heat demands,
9
or for the full heating of rooms in case of a corresponding heat demand.
Every other use is considered as not intended; the manufacturer will not give any war-
ranty for this.
Arbitrary conversions and modifications are expressively forbidden due to safety rea-
sons. No liability is assumed for damage resulting from the use of non-original spare
parts and accessories as well as resulting from arbitrary conversions and modifications
of the device.
No liability is assumed in case of non-observance of the safety notes, improper han-
dling, and any use not in accordance with the intended use.
The system convectors of the WLK and WLKP series supply heated air for a comfort-
able room climate, using high-quality heat exchangers.
The highly developed and elegant decorative roll grille or decorative linear grille (to be
ordered separately) makes a perfect surface finish for every system convector.
Product description
Operating medium
9
Water according to VDI 2035 or a water/glycol mixture (max. 30%) may be used
as operating medium.
Hint
Depending on the heating installation, the use of glycol leads to power
losses.