Hardware
Device Description Embedded HMI XVH-3x0
Commissioning
01/05 AWB2776-1559GB
© by Moeller GmbH
11
4.4 E
THERNET
RJ45 10/100 Mbit
The IP addresses can be obtained from your system or network administrator.
IP addresses must be uniquely defined in an Ethernet network.
Î
Further information: Networks in brief [2]
Î
LED functions: Chapter 9
Cabling
The network is implemented with shielded twisted pair cables (STP or UTP) and shielded RJ45 plug
connectors. The maximum permissible cable length is 100 m. See also the specification as per
EIA/TIA 568 TSB-36. When preparing the cables it must be ensured that the cable shield is correctly
connected to the connector housing.
A crossover cable must be used for connecting one device with another. A 1:1 cable must be used
when using a hub in the connection.
Î
Further information: Installation instructions, General wiring instructions [1]
