7
Backplate Mounting
1. It is the responsibility of the installing personnel to select the appropriate fasteners suitable for the wall
material and construction. Screws driven into wall studs are recommended for maximum security.
2. Secure the backplate to wall with fasteners using any shims that may be required. See below for dimensional
data of the back plate.
Clarity 4ft Fixtures
Clarity 3ft Fixtures
Clarity 4ft Fixtures
Clarity 3ft Fixtures
3. At least two (2) stabilizing fasteners should be located in Area "H" above the backplate hook to keep the
mounting plate from pivoting forward (Fig. 2). The location of the vertical wall studs are to be determined by
the installation contractor. The hole in area H must be countersunk and the fastener must be flat head. The
hardware in area H must be flush to the backplate extrusion as to not interfere with the bed stop option or
downward travel of the chassis into the mounting plate during installation.
