4
Electrosta
ti
c Discharge (ESD): ESD can damage product(s). Personal grounding equipment must be
worn during all installa
ti
on or servicing of the unit.
Do not touch individual electrical components as this can cause ESD and
aff
ect product performance.
Do not stretch or use cable sets that are to short or are of insu
ffi
cient length.
Do not tamper with contacts.
Do not modify the product.
Do not change or alter internal wiring or installa
ti
on circuitry.
Do not use product for anything other than its intended use.
If installing latching springs: ensure that the springs are fully engaged prior to moving to next
connec
ti
on.
If installing wiring systems: Materials and component parts of a manufacturing wiring system as
described in Ar
ti
cle 604 of the Na
ti
onal Electric Code and Underwriters Laboratories Standard for
Safety #183
MUST BE
installed.
CAUTION: RISK OF PRODUCT DAMAGE
Please see product specific installation instructions for additional warnings or any applicable FCC or other regulatory statements.
Failure to follow any of these instructions could void product warranties.
LED IMPORTANT SAFETY INSTRUCTIONS
•
To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions,
and other hazards please read all warnings and instructions included with and on the fixture box and all fixture
labels.
•
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
•
Installation and service of luminaires should be performed by a qualified licensed electrician.
•
Maintenance of the luminaires should be performed by person(s) familiar with the luminaires’ construction and
operation and any hazards involved. Regular fixture maintenance programs are recommended.
•
It will occasionally be necessary to clean the outside of the refractor/lens. Frequency of cleaning will depend on
ambient dirt level and minimum light output which is acceptable to user. Refractor/lens should be washed in a
solution of warm water and any mild, non-abrasive household detergent, rinsed with clean water and wiped dry.
Should optical assembly become dirty on the inside, wipe refractor/lens and clean in above manner, replacing
damaged gaskets as necessary.
•
DO NOT INSTALL DAMAGED PRODUCT!
This luminaire has been properly packed so that no parts should have been
damaged during transit. Inspect to confirm. Any part damaged or broken during or after assembly should be
replaced.
•
Recycle: For information on how to recycle LED electronic products, please visit www.epa.gov.
•
These instructions do not purport to cover all details or variations in equipment nor to provide every possible
contingency to meet in connection with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser’s or owner’s
purposes, this matter should be referred to Modular Services Company.
