Modern Flames AL45CLX, Installation & Service Instructions Manual

Page: 11 / 20

11
OPERATION
Remote operation:
To turn on the remote control, long press
the Power button until the display turns on
(long pressing the Power button while the
remote is on will turn off the remote).
Powering on the remote will bring you to
the home screen (pictured on the right).
Use the Navigation buttons to highlight the
desired control menu and press Enter.
The remote control comes with a lithium-
ion rechargeable battery and can be
charged with the included Micro USB
charger.
When the fireplace is in standby mode,
pressing the red Power button will turn the
fire image on to the brightest setting.
Press the power button again to turn the
fire image (and heater, if heater is on) to
the standby or off condition.
Pressing Enter while this icon is highlighted will bring
you to the Flame control menu. Pressing down on
the Navigation Ring will decrease the brightness of
the flame then turn off the flame. Pressing up on the
Navigation Ring will increase the brightness of the
flame. Pressing right on the Navigation Ring will
toggle the color of the flame from orange to blue.
Pressing the Home button or the left button will bring
you to the home screen.
Pressing Enter while this icon is highlighted will bring you to the
Temperature control menu. Pressing up will turn the heater to high heat.
Pressing down will turn the heater to low heat, long press down to turn
the heater off. Pressing right will enable the thermostat sub-menu. Use
the up and down buttons to select the set temperature (displayed on the
face of the fireplace). Pressing the Home button or the left button will
bring you to the home screen.
If your fireplace is equipped with the optional RGB halo
light, pressing Enter while this icon is highlighted will bring
you to the Feature control menu. Pressing Enter to turn on
or turn off the halo light. Pressing up or down on the
Navigation Ring will increase or decrease the brightness.
Pressing right will change the color. Pressing the Home
button or the left button will bring you to the home screen.
Pressing Enter while this icon is highlighted will bring
you to the Information menu. Displayed in this menu will
be the model name, features installed and whether the
device reads in Fahrenheit or Celsius. See the FAQ for
instructions to toggle the remote Fahrenheit or Celsius.
Home
Battery Indicator
Flame control
Temperature control
Charge port
Color control
Information
Navigation Ring
Power
Enter