Modern Flames AL45CLX, Installation & Service Instructions Manual

Page: 10 / 20

10
OPERATION OPERATION
OPERATION
On the bottom of the unit is a main power switch. Switch this to the on position to begin using the
fireplace. Directly below the flame, on the right hand side are 3 small LED status lights, as well as
function controls and a digital temperature readout.
When all indicator lights are off, pressing on
any button will only show the status. Once the
indicator lights are on you can touch any func-
tion button to control the fireplace. Touch the
power button to turn the machine on. This will
be indicated by 1 orange LED light. Touch the
Heater button once to turn the heater on low,
and touch again to turn the heater to high.
The Backlight button dims the flame image
from high, medium, low and off in that order.
Power
When the switch turns on, this orange pilot
lamp is always on. It shows the fire is ener-
gized.
The status light above shows that the power is
on and the heater is on low
The status light above shows that the power is
on and the heater is on high
Heater
Backlight
To use the built in digital thermostat, start by set-
ting the heat to high or low. You may now set the
temperature limit by using the up or down arrows.
After selecting the set temperature, the arrows will
fade and the ambient room temperature will be dis-
played. The heater will energize when the room
temperature is below the set temperature, and will
continue to function automatically until turned off by
touching the Heater function on the glass face or
remote control. See the FAQ for instructions to tog-
gle the device to Fahrenheit or Celsius.
The digital control may be unplugged from the
touch control for manual operation.
The fea-
tures will be off, low heat or high heat.