30
Water Softener
•
The water softener must be set manually, using the water
hardness dial.
•
The water softener is designed to remove minerals and salts
from the water, which would have a detrimental or adverse
effect on the operation of the appliance. The more minerals there
are, the harder your water is.
•
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise you
on the hardness of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of salt
consumed based on the hardness of the water used. This is intended to
optimize and customize the level of salt consumption.
For: WP 7090 WBR
Please follow the steps below for adjustment in salt consumption:
1.
Switch on the appliance.
2.
Press the Start/Pause button for more than 5 seconds to start
the water softener set model within 60 seconds after the
appliance was switched on.
3.
Press the Start/Pause button to select the proper set according
to your local environment, the sets will change in the following
sequence: H1->H2->H3->H4->H5->H6.
4.
Press the Power button to end the set-up model.
WATER HARDNESS
Water softener level
Salt
consumption
(gram/cycle)
German dH French fH British
Clarke
Mmol/l
0 - 5
0 - 9
0 - 6
0 - 0.94
H1->Rapid Light bright
0
6 - 11
10 - 20
7 - 14
1.0 - 2.0 H2->90 min Light bright
9
Summary of Contents for WP 7090 WBR
Page 63: ...02 21 ...
