22
2.
Place the end of the funnel (supplied) into the hole and pour in
about 1.5kg of dishwasher salt.
3.
Fill the salt container to its maximum limit with water, It is normal
for a small amount of water to come out of the salt container.
4.
After filling the container, screw back the cap tightly.
5.
The salt warning light will stop being after the salt container has
been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing
program should be started (We suggest to use a short program).
Otherwise, the filter system, pump or other important parts of the
machine may be damaged by salty water. This is out of warranty.
Basket Used Tips
Adjusting The Upper Basket
Type 1:
The height of the upper basket can be easily adjusted to accommodate
taller dishes in either the upper or lower basket.
NOTE!
•
The salt container must only be refilled when the salt
warning light ( ) in the control panel comes on.
Depending on how well the salt dissolves, the salt
warning light may still be on even though the salt
container is filled.
•
If there is no salt warning light in the control panel (for
some Models), you can estimate when to fill the salt into
the softener by the cycles that the dishwasher has run.
•
If salt has spilled, run a soak or quick program to remove
it.
Summary of Contents for WP 7090 WBR
Page 63: ...02 21 ...
