11
About The Safety Supply Hose
The safety supply hose consists of the double walls. The hose's system
guarantees its intervention by blocking the flow of water in case of the
supply hose breaking and when the air space between the supply hose
itself and the outer corrugated hose is full of water.
How to Connect The Safety Supply Hose
•
Pull the safety supply hoses completely out from storage
compartment located at rear of dishwasher.
•
Tighter the screws of the safety supply hose to the faucet with
thread ¾ inch.
•
Turn water fully on before starting the dishwasher.
How to Disconnect The Safety Supply Hose
•
Turn off the water.
•
Unscrew the safety supply hose from the faucet.
Connection of Drain Hoses
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm,
or let it run into the sink, making sure to avoid bending or crimping it. The
height of drain pipe must be less than 1.000 mm. The free end of the
hose must not be immersed in water to avoid the back flow of it.
WARNING!
A hose that attaches to a sink spray can burst if it is installed on
the same water line as the dishwasher. If your sink has one, it is
recommended that the hose be disconnected and the hole
plugged.
Summary of Contents for WP 7090 WBR
Page 63: ...02 21 ...