18
1.
Affix the condensation strip under the work surface of cabinet.
Please ensure the condensation strip is flush with edge of work
surface.
2.
Connect the inlet hose to the cold-water supply.
3.
Connect the drain hose.
4.
Connect the power cord.
5.
Place the dishwasher into position.
6.
Level the dishwasher. The rear food can be adjusted from the
front of the dishwasher by turning the Philips screw in the middle
of the base of dishwasher use a Philips screw. To adjust the front
feet, use a flat screw driver and turn the front feet until the
dishwasher is level.
7.
Install the furniture door to the outer door of the dishwasher.
8.
Adjust the tension of the door springs by using an Allen key
turning in a clockwise motion to tighten the left and right door
springs. Failure to do this could cause damage to your
dishwasher.
9.
The dishwasher must be secured in place. There are two ways
to do this:
–
Normal work surface: Put the installation hook into the
slot of the side plane and secure it to the work surface
with the wood screws.
–
Marble or granite work top: Fix the side with Screw.
Summary of Contents for WP 7090 WBR
Page 63: ...02 21 ...
