3
•
For the correct operation of this appliance (water heater), it is
necessary to pay attention that the maximum inlet water pressure
is 0.8 MPa (0.8 Bar).
•
If the power cord is damaged, it must be replaced by the
manufacturer or qualified technicians to avoid hazard. Contact
MODENA
Customer Care for repair.
•
The pressure relief valve must be operated and checked regularly
to remove limestone deposits and to ensure that it is not blocked.
•
In order to avoid hazard due to inadvertent resetting of thermal
cut-off, this water heater must not be supplied through external
switching device, such as timer or connected to the circuit that is
regularly switch on and off by the utility.
•
This water heater (appliance) cannot be used persons with special
needs for their physical, sensory or mental capabilities, or with lack
of experience and knowledge (including children). Unless, they
have been given supervision and instruction concerning the use of
the appliance in a state way and understand the hazard that will
involve. Children should not play with the appliance. Cleaning and
user maintenance should not be performed by children without
supervision.
•
The electrical storage water heater must be installed with mono-
directional safety valve in the inlet pipe. When the tank pressure is
over than 0.8 MPa, it will automatically activate the safety valve,
and water will flow out from the drainage pipe. In any condition, the
outlet valve must not be blocked. If there is a need to empty the
water in the tank, close the main water supply first. Remove the
fixing screw nail on the safety valve, and then lift the plastic handle
up to let the water flow out naturally. See the picture below.
PART 1: IMPORTANT SAFETY INFORMATION
Fixed Screw Nail
Water Outlet Safety
Valve
Opened Water Drainage
Valve Position
Handle for Water Drainage
Valve
