6
Plumbing Connection
All piping parts should use G1/2” standard. Wind some white
sealing tape to the thread sector of the inlet pipe (marked with
blue).
Install the safety valve to the inlet pipe and then connect it to the
cold water pipe supply line.
Install a drainage pipe to the safety valve to drain away waste
water.
Install the drainage pipe in continuously downward direction and in
a frost-free environment.
Connect the hot water pipe (marked with red) to the outlet pipe.
Do not over-tighten the safety valve and all pipe connections as it
may cause the damage to the connection.
Make sure that all pipes are clean before installing the tap/valve
and shower.
Hot Water Outlet
Nut of Hot Water Outlet
Mixing Valve
(Hot and Cold)
Shower
Cold Water Inlet
Safety Valve
Drainage Pipe
Nut of Cold Water Inlet
