Page
Before you begin assembly, group the parts as we list them below. This will ensure that you have all of the parts before you begin
assembly and it will also help you become familiar with each part.
IF you FInD Any pARTs MIssIng oR DAMAgeD, pleAse conTAcT youR locAl DIsTRIBuToR,
usiNG tHe seParate CustoMer serviCe iNforMatioN sHeet iNCLuDeD WitH Your Kit.
Kit CoNteNts
airfraMe asseMBLies
q
(1) Fuselage
q
(1) Right Wing Panel with Aileron and Hinges
q
(1) Left Wing Panel with Aileron and Hinges
q
(1) Horizontal Stabilizer with Elevator and Hinges
q
(1) Vertical Stabilizer with Rudder and Hinges
q
(1) Landing Gear Bracket
q
(2) Wheels
q
(4) Mounting Straps
q
(8) M3 x 12mm Wood Screws
q
(2) Wheel Spacers
q
(2) Wheel Collars
q
(2) M2 x 5mm Machine Screws
q
(1) Tail Skid
q
(2) Mounting Straps
q
(4) M3 x 12mm Wood Screws
MaiN LaNDiNG Gear asseMBLY
taiL sKiD asseMBLY
eLevator aND ruDDer CoNtroL sYsteM asseMBLies
aiLeroN CoNtroL sYsteM asseMBLY
q
(2) 3-1/8" (80mm) Threaded Pushrod Wires with 90º Bends
q
(2) Control Horns with Backplates
q
(2) Clevises
q
(2) Snap-Keepers
q
(6) M2 x 16mm Machine Screws
q
(2) Stranded Pull-Pull Cables
q
(4) Control Horns (May Differ from That Shown)
q
(4) Clevises
q
(4) Couplers with Z-Bends (2 Long and 2 Short)
q
(4) Threaded Couplers
q
(8) Flanged Crimp Collets
q
(8) M2 x 16mm Machine Screws (Quantity May Differ)
q
(8) M2 Hex Nuts (Quantity May Differ)
q
(2) Engine Mounting Beams
q
(4) M3 x 18mm Machine Screws
q
(4) M3 x 25mm Socket-Cap Screws
q
(4) M3 Lock Nuts
q
(4) M3 Blind Nuts
q
(12) M3 Flat Washers
eNGiNe MouNt asseMBLY