Modecom MC-4220 User Manual Download Page 21

Page: 21 / 156

802.11n WLAN ADSL2+ Router

IP address and sub-

net mask:

The IP address and subnet mask assigned to your WAN

interface. This address is used temporarily until your ISP
assigns a real IP address (via DHCP or PPP – see Inter

net Access.

Default gateway:

The address of the ISP server through which your Internet

connection will be routed.

DNS servers:

The Domain Name System (DNS) servers used by your

ISP to map domain names to IP addresses.

Your ISP assigns all of these settings. In most cases, you

will not

need to make

changes to these settings in order for your Internet connection to work. If your ISP

does ask you to change any of these settings, follow the instructions for manually

configuring your device in

Internet Access

About Wireless ADSL2+ Router

This section displays details of your device’s hardware and firmware versions. If

you need to contact your ISP’s support team, they may need to know which hard-

ware/firmware versions you are using in order to answer your query.

Your hardware version details contain information about the make and model of

your device and its exact hardware components.

Your firmware version details contain information about the software program run

ning on your device. From time to time, MODECOM may update or add new features
to this firmware. They then make the latest updated version available to you via the
Internet. For details of how to update your firmware, see

Admin -> Upgrade Firm-

ware

Wireless Network

This chapter assumes that you have already set up your Wireless PCs and in-

stalled a compatible Wireless card on your device. See

Configuring Wireless PCs

Basic Settings

This page contains all of the wireless basic settings. Most users will be able to

configure the wireless portion and get it working properly using the setting on this
screen.

The

Wireless Network

page allows you to configure the Wireless features of your

device. To access the

Wireless Network Basic Settings

page:

From the left-hand

Wireless

menu, click on

Basic Settings

. The following page is

displayed:

Summary of Contents for MC-4220




























































































































































Search results

Summary of Contents for MC-4220

Reviews:

Related manuals for MC-4220

Brands by name

Popular brands

Modecom MC-4220, User Manual

Search results

Summary of Contents for MC-4220

Reviews:

Related manuals for MC-4220

Brands by name

Popular brands