www.modecom.eu
48
802.11n WLAN ADSL2+ Router
Other pages such as
Wireless Basic Settings page
and
Wireless Security Setup
page
will also be updated appropriately as described in previous sections. In this
case, AP is in un-configured state before the station initiates the WPS handshake.
According to the WPS spec, AP will create a wireless profile with WPA2-mixed mode
and a random-generated key upon successfully doing the WPS handshake. How
-
ever, AP will use the original wireless profile and give it to the station if AP is already
in configured state. That means all settings of AP will not change. Hence, all WPS
related pages keep the same.
Internet Access
This chapter describes how to configure the way that your device connects to the
Internet. Your ISP determines what type of Internet access you should use and pro
-
vides you with any information that you need in order to configure the Internet access
to your device.
Your device needs the following address information in order to access the Inter
-
net:
ATM PVC
To configure ATM PVC, enter the VPI and VCI provided by
ISP. Select the Service Type Index, Service Category and
enter the following information:
Peak Cell Rate
•
Sustainable Cell Rate
•
Maximum Burst Size
•
Connection Type
To configure the connection type, select the protocol and
encapsulation type as indicated by ISP. Supported Protocol
types are:
RFC1483 Bridged
•
RFC1483 MER
•
PPPoE
•
PPPoA
•
RFC1483 Routed
•
Supported Encapsulation types are:
•
VCMUX
•
LLC/SNAP
•
WAN IP Settings
To configure WAN IP settings, enter the information as indi
-
cated by ISP. Enable/Disable the Access Concentrator option.
Either enter the WAN IP or select the option to automatically
obtain IP address.
Check as applicable the following two options:
Enable NAT
•
Add default Route
•
