Remote Switch Configuration Menu
15
REMOTE SWITCH CONFIGURATION MENU
- CONTINUED
Step 1 - Choosing a switch input to configure
To choose a switch input to configure, press that inputs
respective button.
Step 2 - Selecting Switch Type
Tell SceneStyle the type of switch which has been
connected. The remote switch input being configured
will flash red.
You will now be required to select a two digit code which determines the function of the
switch. This code is selected in Steps 3 and 4 on the following page. You will then be
required to enter this code in Step 5.
SWITCH TYPE
DESCRIPTION
COMMON USES
Momentary
Switch
Triggers an action each
time it is pressed.
Impulse dimming
Latching Switch
(Alternate Action)
Triggers an action
each time the switch
is moved to a new
position.
Two-way switching
Latching Switch
(Defined Action)
Triggers the same
action when switched
off and the same
action when switched
on.
A defined action
switch can be
labelled with its
functions.
Contact
Closure
Triggers when the
contact is closed.
PIR
Contact
Opening
Triggers when the
contact is opened.