Operation
4
What is Impulse?
Impulse is an alternative mode of operation where the brightness of each circuit is controlled
individually using its own button.
Impulse operation
•
A short press of buttons 1-4 will switch the respective circuit on and another press will
switch it off.
•
Holding a circuits respective button will raise or lower the brightness of that circuit. The
direction of dimming can be reversed by first releasing and then holding the button again.
•
The raise and lower buttons can be used to collectively adjust the brightness of all the
circuits which are currently on.
•
To turn off every circuit, the off button can be pressed.
To change to Impulse operation, see Entering the configuration menus
(p.10)
, followed by the
Operation configuration menu
(p.11)
.
Factory restore resets every scene, colour and setting to the factory defaults. Once complete,
SceneStyle will automatically return to the main screen. To do this, see Entering the
configuration menus, followed by Factory restore
(p.10)
.
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
ON
RAISE
LOWER
OFF
Factory Restore
