42
43
Sequencer Page
This page shows you the current sequencer grid and allows you to enable/disable steps. You
can switch between currently selected track using the menu on the far left. You can clear a
row by pressing and holding on a row. Holding for longer will delete all rows.
Below the sequencer grid are 8 trigger pads. These trigger pad functions are changed by the
menu to the left of them:
Trigger - triggers the sample but does not input a step
Input - triggers the sample and inputs a step
Mute - mutes the track
Solo - solos the track
Kit - changes to a new kit preset
Fill - triggers a fill from one of the fill slots that can be edited on the live page
On the far right hand side there are quick shortcut button to load new patterns. If you want
to save a pattern to one of these slots then you can press and hold on the slot you would like
to save.
Parameter Animation Page
This page gives you access to the 4 parameter animation tracks. Tracks can be enabled/
disabled with the parameter track number button on the far left and armed with the REC
button below the track number button.
The main sequencer track and parameter value can be selected with the text sliders to the
right of the the number button. Below these are options to initialise the track to the chosen
parameters current value and the step multiplier.
There are then 16 sliders that can be used to change the chosen parameters values for each
step.
On the far right hand side there are quick shortcut button to load new patterns. If you want
to save a pattern to one of these slots then you can press and hold on the slot you would like
to save.
