Mocet IP3022 User Manual Download Page 18

Page: 18 / 68

Page 18

MOCET IP3022 SOHO IP Deskphone User Guide

Headset
Connector

RJ-9 Jack for connecting headset cord.

LAN Port

RJ-45 Jack 100/10Mbps Ethernet port for connecting to the

local area network (LAN). This port can support power over

Ethernet (PoE) if the LAN switch provides it.

PC Port

RJ-45 Jack 100/10Mbps Ethernet port for connecting to a

computer.

Power DC Jack

If a power source from adaptor is required, the adapter is

plugged in here. Please order the IP3022 power adapter

separately from MOCET.

EDM Port

SATA interface for attaching the Extended Dial Module (IP-

EDM) accessory. Up to two IP-EDMX units can be

supported on the IP3022. Please refer to IP-EDMX Quick

Installation Guide for more information.

[Note]: If you are using a power adaptor 5V/550mA, you

should change to a 5V/2A power adaptor which is one

standard power supply of IP3000 phone series.

Console /
EHS Port

This port has two functions. The default function is EHS

(Electrical Hook Switch) interface, and the port can be

configured via phone Menu settings.

1. Console port: it is for engineering maintaince purpose.

2. EHS port: it connects to IP-EHS for Wireless Headset

support. This can be connected to a general DHSG, or

Jabra UART or Plantronics APD-80 interface.

Stand Slots

These 2 slots are used for snapping the stand.

Hang Holes

These 2 holes are reserved for wall-mount support.

Wire Route
Ditch

The wires of Handset and Headset can be routed and run in

the ditches.

Their locations are shown in the figure below.

Summary of Contents for IP3022




































































Search results

Summary of Contents for IP3022

Reviews:

Related manuals for IP3022

Brands by name

Popular brands

Mocet IP3022, User Manual

Search results

Summary of Contents for IP3022

Reviews:

Related manuals for IP3022

Brands by name

Popular brands