Mocet IP3022 User Manual Download Page 52

Page: 52 / 68

Page 52

MOCET IP3022 SOHO IP Deskphone User Guide

3.15.3.

Attended Transfer

To do Attended transfer:

1. During an active call, press the

Transfer

(

) hot key.

2. The active call is placed on hold, and an entry screen is displayed for the number

you want to transfer to.

3. Press

Navigation OK

or “

Dial

” soft-key to transfer the call to the number you want to

transfer to.

4. Wait until the call is picked up, then press the

Transfer

(

) hot key to complete the

attended transfer.

Note: sometimes, you may place more than 2 calls on your phone, select and press the

Line

key to choose the call you want to do transfer first, and then do transfer.

3.16. Forwarding a Call

Forwarding your incoming call to another party is sometimes called as static forwarding.

You can also dynamically forward calls while your phone is ringing.

Call Forward can be configured either on phone mode or on line mode. When it is on

phone mode, its settings are applied for all lines. When it is on line mode, you should

configure each line one by one.

There are four types of static forwarding. For more information on how to setup static call

forwarding, please refer to the 2.2.3 Call Forward.



Always

Forward



Busy

Forward



No Answer Forward



DND

Forward

To use dynamic forwarding:

1. When the phone rings with an incoming call, press the “

Fwd

” soft-key.

2. Enter a number to forward the incoming call to.

3. Press

soft-key to forward the call.

3.17. Using Voice Mail

Your voicemail can be saved either on your local phone or on hosted SIP service server

depends on phone and server configuration. When you phone got new voice mail(s), it is

Summary of Contents for IP3022




































































Search results

Summary of Contents for IP3022

Reviews:

Related manuals for IP3022

Brands by name

Popular brands

Mocet IP3022, User Manual

Search results

Summary of Contents for IP3022

Reviews:

Related manuals for IP3022

Brands by name

Popular brands