MOBRIDGE M1000
-
M
-
DA SERIES |
INSTALL NOTES
PAGE
| 6
Power Wiring Harness & MOST cable
The M1000-M-DA kits come with a universal power, ground & remote turn on harness as pictured below. We
recommend these products be installed by a professional Installation Technician.
Figure 1 DA1 Kit Contents
Figure 2 DA2/DA3 Kit Contents
We highly recommend the MOST connection be made as soon after the Head unit as possible. The DA units come
with a MOST fiber extension to be able to extend the factory amplifier wiring to the unit. The units also come with a
range of other MOST connector shells just in the case the car does not have an existing amplifier. In these cases
the installer can change the MOST connector shells and form a ‘T’ piece from the MOST cabling.
NB: The DA unit needs to be connected to the car before the PC software will work as the DA will not power
up until it has MOST light.
NB: If the MOST Bus is not connected properly, this can affect many functions of the vehicles operating
system including the ability to start the vehicle.
Graphical Interface Operation
Red = 12v Positive
Black = Ground
Blue = Remote Turn On
