70
/98
T24S System Manual: Operating The Door Station
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Step 5: Select The Master T24S
After you have assigned a static IP address to each T24S (see Section 3.2.2), you must
designate one
T24S as the master T24S
- meaning one T24S serves as the main entrance.
A SIP server is activated later on the designated master to establish VOIP/SIP connections.
Step 6:
Search And Configure Grandstream IP Telephones Using MxEasy And The Master T24S
Now, run through the remaining Assistant dialogs for the Master T24S as described in
Section 3.2.2. In addition, in the dialog "Select camera", select only the master T24S to
add to the system. In the "Reset configuration" dialog, select the option "Reset all selected
cameras to the MxEasy factory defaults". With the master T24S, you must search for the
Grandstream telephone and configure it in the "Door Bell Setup" dialog. Proceed as follows:
For example, select the action "Voice over IP call" in the drop-down list to the left for the
first door bell. Next, in the drop-down list to the right, select the item "Search Grandstream
IP telephones". This triggers an
automatic initial default configuration for all Grandstream
telephones by the master T24S
. The videophones will automatically switch off and restart
with the appropriate new configuration.
Wait until every Grandstream telephone has started up and the SIP quick-dial number that
was assigned to each phone (*101, *102, etc.) appears on the display (MX_SIP). The Master
T24S Door Station was assigned *201 as a SIP quick-dial number. Now, close the MxEasy
Assistant. The MxEasy user interface will appear with the live image from the Master T24S.
Hint:
Also applies to
existing Grandstream
IP videophone
