45
/98
One T24S In A Separate Network
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
3.2 One T24S In A Separate Network
3.2.1 Automatic Initial Confi guration
Starting Initial Confi guration
Start the automatic initial confi guration by carrying out the following steps:
1. Unpack the
Grandstream
telephone and
attach
the handset.
2. Connect the
PoE switch/router
or the NPA-PoE set and
connect the power supply
.
3. Connect the
Grandstream
telephone to the switch/router or the NPA-PoE set (using
patch cable), connect the power adapter and wait for the telephone to start. The
display shows the
note "NO IP"
(no IP address). The time and date have not been
updated. The preconfi gured menu language is English.
4.
Connect the T24S Door Station to the switch/router (using patch cable).
The buttons will light up for four seconds.
During this time, press the doorbell button
(bottom button) until this button fl ashes
. This starts automatic initial confi guration,
which will take around 5 minutes:
• The T24S lights blink as the camera starts up.
• The current T24S IP address and network data are announced automatically.
• Each Grandstream telephone is contacted and confi gured by the camera.
• Each Grandstream telephone restarts automatically each time the MOBOTIX confi gura-
tion is updated.
• Each Grandstream telephone displays its newly assigned IP address (e.g. 192.168.0.20)
and SIP quick-dial number (e.g. MX_SIP *101) on the display.
•
*101 is the new SIP quick-dial number for the fi rst IP telephone, while the T24S
has the *201 SIP quick-dial number.
5. The T24S Door Station and Grandstream telephone are now ready for use.
PC
(optional)
GS 1
(*101)
GS 2
(*102)
T24
(*201)
Separate
network
Free MXEasy download
at www.mobotix.com
Separate network:
One or more T24S
modules with remote
stations (PC/video-
phone) and PoE switch
Important: T24S
must fi rst be discon-
nected from the
power source (PoE)
