46
/98
T24S System Manual: Operating The Door Station
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Results
The following settings are made automatically during initial confi guration:
•
SIP server in the T24S is activated.
•
Grandstream telephone and network settings
are adjusted.
•
T24S and Grandstream telephones are confi gured to use DHCP,
and are automati-
cally assigned an IP address and
SIP quick-dial number
.
•
Pushing the bell button
located on the camera module (if available)
calls all con-
nected Grandstream telephones
(reprogrammable in MxEasy).
•
The 1 to 4 Siedle bell buttons are automatically assigned to the 1 to 4 connected
Grandstream videophones
(button 1 connects to *101, button 2 connects to *102,
etc.). If this is not desired, or if the number of phones and bell buttons is not equal,
then the
bell behavior can be changed for each individual button at any time
using MxEasy on the control PC
(Section 3.3).
• For an
intercom,
or to call the door station directly, simply
lift the handset of the
Grandstream telephone
.
The setup procedure is now complete, as no PC is needed for further operation in this
scenario if you are content to use the default settings for the connected door station mod-
ules (see Section 3.2.3). You should still familiarize yourself with the functions and operation
of the Grandstream telephone (see Section 3.6).
Result of automatic
initial confi guration
Here, the T24S acts as
the DHCP server and
distributes IP addresses
GS 1
(*101)
GS 2
(*102)
T24
(*201)
VoIP video
call
Lift handset
PC
(optional)
TCP video
call
Pick up
MxEasy
“receiver”
