33
/40
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Function Of The Two Mx2wire LEds
Each Mx2wire unit has two LEDs (green and orange), which provide information on the
current functional status of the PoE power supply and on the transfer of data. The LEDs
can either light up continuously (ON) or they can blink (BLINK).
LEd 1 – Sender LEd 2 – Sender
LEd 1 – receiver
LEd 2 – receiver
ON
ON
ON
ON
Power is
supplied to the
Mx2wire unit
from the switch
(PoE)
Network
connection to the
switch (PoE) has
been established
Power is supplied
to the Mx2wire unit
via the two-wire
cable
Network
connection to the
camera has been
established
BLINK
BLINK
BLINK
BLINK
Indicates that
the camera
is receiving
power (i.e., it is
connected)
Data is
transferred from
the sender
never
Data is transferred
to the receiver
LEd 1 green
(power)
LEd 2 orange
(data)
LED error messages are
listed in Section 3.3
The sender is the
Mx2wire unit that
receives power from the
switch, as data is trans-
ferred in both directions
Two-wire cable
Sender
Receiver
PoE switch/injector
IEEE 802.3af
