2.8
Important Notes
50
2.8.1 Safety Regulations
50
2.8.2 Suitable Cables for the MOBOTIX ExtIO
50
2.8.3 Safety Notes for Operating the MOBOTIX ExtIO
51
2.8.4 Weatherproofness, Temperature Range
52
2.8.5 Cleaning Instructions
52
2.8.6 Additional Information
52
3
OPERATION OF THE EXTIO
54
3.1
Activating the ExtIO
54
3.1.1 Activating the USB Operating Mode
55
3.1.2 Activating the Ethernet Mode (NET)
56
3.1.3 Setting up the Network Parameters of the ExtIO for Ethernet Operation
57
3.1.4 LED-Patterns of the ExtIO
59
3.1.5 Starting the ExtIO Using the Factory Default Settings
60
3.1.6 Starting the ExtIO With an Automatic IP Address (DHCP)
61
3.2
Sensors and Input/Output Interfaces of the ExtIO
62
3.2.1 Status LEDs
62
3.2.2 Speaker and Microfon
62
3.2.3 Buttons
63
3.2.4 PIR Motion Sensor
63
3.2.5 Signal Inputs/Outputs
63
3.2.6 Temperature Sensor
64
3.3
Software Updates
65
3.4
Configuration Sample
66
3.4.1 Functional Overview
66
3.4.2 Overview of the Configuration Steps
67
3.4.3 Configuring the MOBOTIX Camera
67
3.4.4 Configuring a Softphone
73
APPENDIX: DECLARATION OF CONFORMITY
DRILLING TEMPLATES (SCALE 1:1)
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2
/76
MOBOTIX ExtIO User Manual
Information subject to change without notice!
Copyright © 1999-2008 MOBOTIX AG, Kaiserslautern, Germany.
All rights reserved. MOBOTIX, MxPEG and MxControlCenter are worldwide
trademarks of MOBOTIX AG. Microsoft, Windows and Windows Server are reg-
istered trademarks of Microsoft Corporation. Apple, the Apple logo, Macintosh,
OS X and Bonjour are trademarks of Apple Inc. Linux is a trademark of Linus
Torvalds. All other marks and names mentioned herein may be trademarks or
registered trademarks of the respective owners.
