Mobiltech ZEUS200, Installation Manual

Page: 17 / 28

Zeus200 Installation manual
V 1.0.7 - 12/10/2020 Page 17 of 28
2.5.3 Electrical diagram
The following figure shows the wiring diagram, with the numbering of the terminals inside the control
unit and the number of cable entries to be used for the needed connections.
Terminal or
Connector
Element - Wire Cable entry
1 Generator – Black wire 6mm 1
2 Generator – Red wire 6mm 1
3 Generator – Brown wire 4mm 1
4 Generator – Green wire 4mm 1
5 Sola panel (opt.) – Negative 2
6 Solar panel (opt.) – Positive 3
7 Engine battery (opt.) – Negative 5
8 Engine battery (opt.) – Positive 5
9 Services battery – Negative 6
10 Services battery – Positive 6
11 Display Unit – Yellow wire 7
12 Display Unit – Green wire 7
13 Display Unit – Brown wire 7
14 Display Unit – White wire 7
15 - -
16 Generator – Black or cyan wire 0.5mm 1
17 Generator – Red or white wire 0.5mm 1
T Temperature sensor 4
Key Signal
(center)
D+/+15 cable 4