i-Sat
Mounting and usage instructions
Page 3 of 12
1. Introduction
Read carefully and completely this manual before starting with mounting operations.
ATTENTION
The antenna and the remote control must be
mounted only by qualified personnel
In order to prevent danger during mounting operations, during normal operation and during
vehicle moving, please observe carefully the information provided in this manual.
The correct execution of the mounting operations and a correct cabling of the system are
fundamental prerequisites to guarantee conformity with related regulations.
The system is covered by CE brand and by a conformity declaration, as reported in Chapter 3.
2. Safety instructions
2.1.
Proper use (for the intended purpose)
The i-Sat is designed to receive digital TV and radio programs via satellite. The turntable can be
used to receive digital TV and radio signals in the frequency range from 10.70 to 12.75GHz. Any
use other than that specified above will void the warranty or guarantee
.
The following circumstances result in the loss of all warranty and liability claims towards the
manufacturer:
•
Improper installation
•
Use of non-specified mounting materials, which cannot guarantee the mechanical reliability
of the antenna system
•
Non-permissible use, e.g. use of the planar antenna for storage
•
Structural changes or interference with the components and mounting accessories in the set,
which could endanger both the mechanical and functional reliability
•
Improper or forcible opening of the components
•
Use of cleaners containing solvents, such as acetone, nitro-cellulose combination thinners,
degreasers, petrol, etc.
•
Failure to observe installation and safety instructions in this manual
•
Breaking of warranty seals
The turntable may be operated in an ambient temperature range of -10 °C to +40 °C.
Operating the system outside this range may result in malfunctions or damage to the
system.
2.2.
Safety during installation work
When carrying out installation work in locations where there is a risk of falling, take
appropriate safety precautions, e.g. use of a working platform. Make sure that the
vehicle roof is sufficiently strong and stable to carry out the installation work (risk of
damage or collapsing of roof).
