InVision USB-Peripheral to Ethernet Adapter User Guide
Connecting the MC50 to the PS6U1UPE
Setting up your PS6U1UPE is easy and includes only these simple steps.
1.
Connect the Power Supply (PN
170140-000)
,
as shown below.
2.
Connect the Mini USB Adapter
Cable (PN 190087-000) to the
MC50 USB cable and to the
PS6U1UPE,
as shown below.
3.
Connect the Ethernet Cable to the
network (see the Section
“Connecting the PS6U1UPE to your
Network” for more information.)
The PS6U1UPE requires a power supply when it is connected to the MC50.
Although the solid green LED is lit whenever the USB cable is correctly
connected, there is not enough power to operate the device. Failure to connect
the power supply before using could damage the device.
The PS6U1UPE is provided without a power supply or any USB adapter cables.
Since the MC50 uses a different cable than the MC3000, and the MC3000
doesn’t require a power supply, each peripheral device is provided separately
to ensure you don’t have to buy items you cannot use.
To purchase a cable or power supply, contact Mobility.
If you have any questions regarding requirements or availability, please
contact Mobility.
5
Mobility Electronics, Inc
