background image

 

 

InVision USB-Peripheral to Ethernet Adapter User Guide 

Getting Started 

Before You Begin 

 

Before you can successfully connect your Symbol MC50 or MC3000 to your 
network with your PS6U1UPE, you must have successfully configured your 
device for ActiveSync operations. For assistance with ActiveSync operations, 

please refer to your Symbol Integrator Guide. 
Only after you have successfully created an ActiveSync partnership between 

your MC50 or your MC3000 and your host computer, and completed an 
ActiveSync operation, should you attempt to connect your device to your 

network. This is important even if you plan to use other 3

rd

 Party 

synchronization software, because using ActiveSync allows you to validate 

your software/hardware installation. Then, if you have problems later making 
your 3

rd

 Party software work, you can focus on the 3

rd

 Party software 

configuration because you know everything else works fine. 

Connecting to the PS6U1UPE 

Setting up the MC50 

Installing the MC50 Software Drivers 

The MC50 requires the installation of software drivers to enable it to communicate through 
your network to complete ActiveSync, or synchronization operations. By design, the MC50 

functions as a USB client device. With the installation of these drivers, the MC50 will now be 
able to also function as a USB host device. 
If you have not already done so, go to 

www.invisioncradles.com

 and download the latest 

PS6U1UPE drivers. The drivers are provided in a self-extracting ZIP file. Simply download 
the file to your computer and follow these simple steps:  

Step 1 – Unpack the software 

Double-click the downloaded file to extract the drivers. The ZIP file will automatically 
unpack the MC50 driver software components to a default directory called C:\MC50Drivers. 

You may change this directory if you wish. However, if you change the directory be sure 
that you remember where you put it, because this is the location where you will move the 

files “from.” 

Step 2 – Verify MC50 Configuration 

Before you start to install the MC50 driver software, 

you must ensure you have successfully completed an 
ActiveSync between the MC50 and your computer via 

the MC50’s USB cable.  
If you have not already configured ActiveSync, please 

do so now and ensure that you successfully 
synchronize between the MC50 and your PC before 

you continue. If you need help, refer to your MC50 
Integrator’s Guide, or contact Symbol Technical 
Support for assistance. 

 2 

Mobility Electronics, Inc 

Summary of Contents for INVISION PS6U1UPE

















Reviews: