background image

 

 

InVision USB-Peripheral to Ethernet Adapter User Guide 

 
Symptom: 

It won’t ActiveSync! 

 

 

Possible Cause 

Action 

ActiveSync partnership between host 

computer and your MC50/MC3000 is not 
correctly established 

Reconnect the MC50/MC3000 directly to the host 

computer and try an ActiveSync operation.  

If it fails, refer to the Symbol Integrator Guide for 

guidance with ActiveSync problems, or contact Symbol 

Technical Support. 

If ActiveSync works OK when directly connected to the 

host computer, see the remaining “possible cause” 

items. 

MC50/MC3000 not configured for DHCP 

Reconfigure device to accept DHCP IP address 

Cannot find DHCP server 

Ensure PS6U1UPE adapter is connected to a router, 
switch, or hub that is serviced by a DHCP server. 

Missing, or improperly configured, software 
drivers (MC50 only) 

Reset (hard reset) the MC50 as directed in Symbol 
Integrator Guide. Reinstall and reconfigure software 

drivers in accordance with current instructions. 

Won’t automatically ActiveSync when inserted 

into the cradle 

The autodetect/autostart capability of ActiveSync does 

not function whenever your device is not connected 

directly to your host computer via the USB cable. 
Synchronization operations must be initiated from the 

MC50/MC3000 device. They cannot be started from 

the host computer unless there is a “direct 

connection.” 

Custom synchronization software does not 

have the ability to “launch” a synchronization 
function 

The MC3000 uses the Windows CE operating system 

which does not include an ActiveSync launch button. 
Therefore, the MC3000 cannot initiate a 

synchronization operation unless the synchronization 

software contains a feature that allows the user to 
initiate the synchronization action. 

 

Other ActiveSync Problems 

If you require more information on the ActiveSync process, please refer to the ActiveSync 
chapter in your Symbol Integrator Guide or visit 

www.Microsoft.com

 and search for 

ActiveSync. For help with other technical issues, contact Mobility Technical Support using 
the contact information provided at the start of this chapter
.  

 9 

Mobility Electronics, Inc 

Summary of Contents for INVISION PS6U1UPE

















Reviews: