background image

13

Kontrollschalter

Section 8

H

eadWay

 M

onitoring

 

and

 W

arning

 (HMW)

8.1.   What is HMW?

The Mobileye C2-270 Headway Monitoring and Warning monitors the driving distance 

from the vehicle in front of you (headway) and alerts you when the headway is less 

than a pre-defined threshold. Headway is measured in seconds, and not physical 

distance.  The  headway  is  the  number  of  seconds  it  would  take  for  your  vehicle 

to  reach  the  current  position  of  the  vehicle  ahead.  Mobileye  C2-270  continuously 

calculates  your  headway  and  displays  it  numerically  on  the  Display  Unit.  A  two-
second headway, in clear weather, is usually considered a safe distance.

8.2.   a Headway Warning is Generated When…

A headway warning is initiated when the headway value is less than a pre-defined 

threshold. This value is configurable by the user.

8.3.   HMW Visual alert

The Headway Meter displays the Headway distance in seconds. As long as there is a 

vehicle ahead of you in your lane, the Headway Meter’s displayed value is continuously 

updated. If no headway value is displayed, the vehicle in front of you is more than 

2.5 seconds away.

Headway Meter (in Seconds)

There are 2 HMW visual alerts, shown in the following illustration, issued according 

to the proximity of the two vehicles:

notice

 – A green car icon is displayed from the moment the system detects a vehicle 

in front of your car and as long as the headway remains greater than 0.6 second.

Warning!

 – A red car icon is displayed when headway is less than 0.6 seconds. This is 

dangerous tailgating, and the distance between the two cars is perilous.

Summary of Contents for C2-270






























Reviews: